I. checking parts

1. Check whether the parts are loose.

2. Is the card clothing tightly attached to the roller?

3. Is the brush device accurate?

4. Is the friction part accurate?

5. Is the effect of convulsion normal?

6, whether the roller belt is too loose and too tight.

Two. Preparation

1, cloth guide cloth to import cloth operation route.

2. Open the blower and prepare for production.

Three. Open the machine

1. According to specifications, setting specifications and setting parameters.

2. Fan.

3, automatic point

4, operation;

Four, cleaning, protection, maintenance

1, pay attention to machine cleaning at any time.

2, do parts maintenance and troubleshooting.

Five, matters needing attention

1, when cleaning machine cloth, we must concentrate our energy, not single operation, prevent injuries.

2. When you start the machine, you must block the front panel and let go.

3, electrical parts (electric boxes) to prohibit the accumulation of flying wool; class cleaning 2 times or more.

4, women workers must wear work caps when they are on duty. Long hair must be inserted into the work cap.

5, the driver is not allowed to work on the skirts and cuffs.

6, when the machine is not used, cut off the power supply in time.

7, when the hair is running, the roll cover must be placed in place.

▲

Shandong Fusheng textile machinery Limited by Share Ltd.